PRADO Classic
The right solution to protect your home from the cold. PRADO Classic series steel panel radiators efficiently distribute heat throughout the room, while their neat appearance
| Type | 10, 11, 20, 21, 22, 30, 33 |
| Height | 300, 400, 500, 600 mm |
| Length | 400–3000 mm (400–2000 mm in 100 mm increments; 2000–3000 mm in 200 mm increments) |
| Nipple | 4 x G ½" (side) |
| Connection size | Nm = H - 50 mm; H = 300, 400, 500, 600 mm |
| Maximum operating pressure | 1.0 MPa (10 bar) |
| Maximum temperature | 120 °C |
| Test pressure | 1.5 MPa (15 bar) |
| Colour | White RAL 9016; other RAL colours available on request |
| Climatic version | UHL |
| Placement category | 4.2 according to GOST 15150 |
| Radiator assembly | 1 piece |
| Solid plug | 1 piece |
| Clips | 4 pieces (6 pieces)* |
| Air vent (Mayevsky valve) | 1 piece |
| Brackets | 2 pieces (3 pieces)* |
| Bracket mounting hardware | 1 set |
| Packaging | 1 piece |
| Passport | 1 piece |
Installation of PRADO steel panel radiators must comply with the requirements of SP60.13330.2016 and SP73.13330.2016.
Radiators should be mounted on flat, prepared (plastered and painted) wall surfaces using brackets (mounting points). The distance between the radiator and the wall is determined by the design of the welded brackets on the back of the radiator and the brackets themselves. The small and large bracket shelves allow radiators to be mounted with different gaps between the radiator and the wall.
Radiators must be installed in the following sequence:
- mark the installation locations for the brackets;
- fix the brackets to the wall using wall plugs;
- remove the packaging only at the points where the radiator is connected to the heating system and mounted on the brackets;
- install the radiator on the brackets;
- connect the radiator to the supply pipes of the heating system.
Technical catalog
Certificate of Conformity
100% Quality
PRADO steel panel radiators are designed specifically for Russian heating system conditions.
They are designed to operate with a coolant temperature of up to 120 °C at a working pressure of 1.0 MPa. Each radiator undergoes a pressure test of 1.5 MPa during production.
GOST Standard
PRADO radiators fully comply with GOST 31311 “Heating Devices. General Technical Specifications.”
Laboratory testing shows that PRADO radiators exceed the minimum GOST standards in many respects. For example, PRADO radiators can withstand a burst pressure of up to 3.5 MPa (35 bar), which is almost 1.5 times higher than the GOST 31311 requirements.
The ISO 9001 international quality management system guarantees the high standard of our products (Certificate of Conformity GOST R ISO 9001-2015 [ISO 9001:2015]).
10-Year Warranty
We are confident in the outstanding quality of our products, which is why we offer one of the longest warranties available.
The warranty period for PRADO steel panel radiators is 10 years from the date of manufacture, provided all operating, storage, transportation, and installation requirements are met.
The warranty covers only defects caused by the manufacturer.
The warranty does not cover radiators:
- if the requirements for operation, storage, transportation, or installation have been violated;
- with mechanical damage sustained during operation, storage, transportation, or installation;
- showing signs of internal or external corrosion caused by chemically aggressive substances or improper use;
- contaminated internally with solid particles or harmful liquids;
- deformed due to excessive test or static pressure, freezing, or hydraulic impact.
If a Warranty Event Occurs
If a defect caused by the manufacturer is discovered during the warranty period, the radiator must be replaced by the manufacturer.
To fulfil warranty obligations, the production date must be visible — it is marked on each radiator during manufacture on the reverse side of the lower welding seam.