PRADO Universal Z

Download PDF catalog

Hygiene, beauty and, most importantly, high heat dissipation. Sterile cleanliness and whiteness are easy to maintain due to the absence of side and top panels. And the lower connection allows you to hide engineering communications "out of sight".

Where to buy

Type	10, 20, 30
Height	300, 400, 500, 600 mm
Length	400–3000 mm (400–2000 mm in 100 mm increments; 2000–3000 mm in 200 mm increments)
Nipple	2 × G ½" bottom right (left on request) and 4 × G ½" (side)
Connection size	Nm = H – 50 mm, where H = 300, 400, 500, or 600 mm
Maximum operating pressure	1.0 MPa (10 bar)
Maximum temperature	120 °C
Test pressure	1.5 MPa (15 bar)
Colour	White RAL 9016; other RAL colours available on request
Climatic version	UHL
Placement category	4.2 according to GOST 15150

Radiator assembly	1 piece
Solid plug	2 pieces
Air vent (Mayevsky valve)	1 piece
Brackets	2 pieces (3 pieces)*
Bracket mounting hardware	1 set
Thermostatic insert	1 piece
Packaging	1 piece
Passport	1 piece

INSTALLATION

Installation of PRADO steel panel radiators must comply with the requirements of SP60.13330.2016 and SP73.13330.2016.

Radiators should be mounted on flat, prepared (plastered and painted) wall surfaces using brackets. The distance between the radiator and the wall is determined by the design of the brackets welded to the back of the radiator and the brackets themselves, which are 70 or 100 mm wide.

Radiators must be installed in the following sequence:

mark the locations for the brackets (mounting points);
fix the brackets to the wall using wall plugs;
remove the packaging only at the points where the radiator is connected to the heating system and attached to the brackets;
place the radiator on the brackets;
connect the radiator to the supply pipes of the heating system.

100% Quality

PRADO steel panel radiators are specifically designed for the conditions of Russian heating systems.

They are engineered to use a coolant with a temperature of up to 120 °C at an operating pressure of 1.0 MPa. Each radiator undergoes a pressure test at 1.5 MPa during production.

GOST Standard

PRADO radiators fully comply with GOST 31311 “Heating Devices. General Technical Specifications.”

Laboratory tests confirm that PRADO radiators exceed the recommended GOST standards in many respects. For example, PRADO radiators can withstand a burst pressure of up to 3.5 MPa (35 bar), which is almost 1.5 times higher than the GOST 31311 requirement.

The ISO 9001 international quality management system ensures the consistently high standard of our products (Certificate of Conformity GOST R ISO 9001-2015 [ISO 9001:2015]).

10-Year Warranty

We are confident in the exceptional quality of our products — which is why we offer one of the longest warranties available.

The warranty period for PRADO steel panel radiators is 10 years from the date of manufacture, provided all requirements for operation, storage, transportation, and installation are met.

The warranty applies only to defects caused by the manufacturer.

The warranty does not cover radiators:

if the requirements for operation, storage, transportation, or installation have been violated;
with mechanical damage sustained during operation, storage, transportation, or installation;
showing signs of internal or external corrosion caused by chemically aggressive substances or misuse;
contaminated internally with solid particles or harmful liquids;
deformed due to excessive test or static pressure in the system, freezing, or water hammer.

If a Warranty Event Occurs

If a defect caused by the manufacturer is discovered during the warranty period, the radiator will be replaced by the manufacturer.

To fulfil warranty obligations, the date of manufacture must be clearly visible — it is stamped on each radiator on the reverse side of the lower welding seam.

Корзина