PRADO Style Universal Z

Download PDF catalog

The flat front panel, hygiene and beauty of the radiator are complemented by optimal heat dissipation. The absence of side and bottom panels eliminates the formation of hard-to-reach places for cleaning and minimizes efforts to maintain cleanliness.

Where to buy

Type	10, 20, 30
Height	300, 500 mm
Length	400–3000 mm (400–2000 mm in 100 mm increments; 2000–3000 mm in 200 mm increments)
Nipple	2 × G ½" bottom right (left on request) and 4 × G ½" (side)
Connection size	Nm = H – 50 mm, where H = 300 or 500 mm
Maximum operating pressure	1.0 MPa (10 bar)
Maximum temperature	120 °C
Test pressure	1.5 MPa (15 bar)
Colour	White RAL 9016; other RAL colours available on request
Climatic version	UHL
Placement category	4.2 according to GOST 15150

Radiator assembly	1 piece
Solid plug	2 pieces
Thermostatic insert	1 piece
Air vent (Mayevsky valve)	1 piece
Clips	4 pieces (6 pieces)*
Brackets	2 pieces (3 pieces)*
Bracket mounting hardware	1 set
Packaging	1 piece
Passport	1 piece

INSTALLATION

Installation of PRADO steel panel radiators must comply with the requirements of SP60.13330.2016 and SP73.13330.2016.

Radiators should be mounted on flat, prepared (plastered and painted) wall surfaces using brackets (mounting points). The distance between the radiator and the wall is determined by the design of the brackets welded to the back of the radiator and the brackets themselves, which have a width of 100 mm.

Radiators must be installed in the following sequence:

mark the locations for the brackets (mounting points);
fix the brackets to the wall using wall plugs;
remove the packaging only at the points where the radiator is connected to the heating pipes and attached to the brackets;
place the radiator onto the brackets;
connect the radiator to the supply pipes of the heating system.

100% Quality

PRADO steel panel radiators are specifically designed for the demands of Russian heating systems.

They are engineered to operate with coolant temperatures of up to 120 °C at a working pressure of 1.0 MPa. Each radiator undergoes a pressure test at 1.5 MPa during production.

GOST Standard

PRADO radiators fully comply with GOST 31311 “Heating Devices. General Technical Conditions.”

Laboratory tests confirm that PRADO radiators exceed the recommended GOST standards in many respects. For example, PRADO radiators can withstand a burst pressure of up to 3.5 MPa (35 bar), which is almost 1.5 times higher than the minimum requirement of GOST 31311.

The ISO 9001 international quality management system ensures the consistently high standard of our products (Certificate of Conformity GOST R ISO 9001-2015 [ISO 9001:2015]).

10-Year Warranty

We are confident in the outstanding quality of our products — which is why we offer one of the longest warranties available.

The warranty period for PRADO steel panel radiators is 10 years from the date of manufacture, provided all requirements for operation, storage, transportation, and installation are met.

The warranty applies only to defects caused by the manufacturer.

The warranty does not cover radiators:

if the requirements for operation, storage, transportation, or installation have been violated;
with mechanical damage sustained during operation, storage, transportation, or installation;
showing signs of internal or external corrosion caused by chemically active substances or misuse;
contaminated internally with solid particles or harmful liquids;
deformed due to excessive test or static pressure in the system, freezing, or water hammer.

If a Warranty Claim Occurs

If a defect caused by the manufacturer is found during the warranty period, the radiator must be replaced by the manufacturer.

To fulfil the warranty conditions, the release date — which is applied to each radiator during production — must be clearly visible on the reverse side of the lower welding seam.

Корзина